If you know the type of soldering iron head used by the soldering machine, you can directly select the corresponding type. When you do not confirm the type, you can confirm the type according to the following methods: 1. The size of the distance placed on the point is appropriate, and there are regular points.
The average welding speed of an automatic soldering machine is 60-120cm/min, which is relatively higher than manual welding (40-60cm/min), mainly due to its fast response time and rapid action; And during operation, it can be achieved without pausing or resting; If welding is carried out manually, the efficiency is often not as high as that of machines, because workers cannot do it without rest
With the plethora of programmable components available today, you can easily store millions of bits of programs and data permanently in a FLASH/EPROM, or cram hundreds of traditional digital components into a CPLD/FPGA the size of a fingernail. An entire microcomputer can also be reduced to a single chip. As long as the R&D engineer is creative, it could be on his lab table...
1、 Excellent performance: This system can switch the packaging methods of IC incoming and outgoing materials at any time according to different packaging methods such as disk mounting, tube mounting, and tape mounting. The same system can simultaneously perform three functions of IC burning, printing, and packaging conversion. 2、 Intelligent operation: Under the control of powerful software, a series of automated IC feeding can be carried out
Early burnable IC is mainly EPROM which can be used to erase data by ultraviolet light, the amount is not large. In recent years, a variety of burnable IC such as EEPROM, Flash, Nand Flash, Nor Flash, PLD, CPLD, and other highly integrated IC have been published, a variety of information, communication, home appliances, handheld electronic products to be in the volume, function, power saving, reliability of various aspects of improved. Thanks in part to advances in burnable IC...
扫一扫