How to use the cutting machine correctly? Let me briefly explain it to you below.

1. The power stabilizer being used needs to be equipped with a 500V component.

2. The components and connecting rods of the equipment need to be lubricated. Before use, apply lubricating oil to both ends of the cutting knife and lift and lower the knife twice by hand to ensure smooth cutting.

III. It is necessary to check whether the movement within the equipment and the switch cam are normal, and whether there is any loosening of the screws.

Four. When using the equipment, it is necessary to ensure the balance between the equipment and the paper output of the printing machine.

Five. The color cutter needs to be sharpened frequently so that it will work better when in use.

Six. The cutting tape can be used to remove and install the iron block extension that is attached to the machine. Wrap the tape with a paper cover.

The above is the correct operation procedure for using the cutting machine. We hope this article can be of help to you.