News center

Motor is widely used in industrial industry, automatic dispensing machine is no exception. The use of motor in the dispensing equipment can make the dispensing machine automatically restore to the setting state after starting up. If the motor is not recovered after the dispensing machine is started, then there is a problem with the automatic dispensing machine, so how to deal with this problem? Let's take a look.

1、Dispensing machine stop button problem solution: check whether the glue machine emergency stop button is pressed.

2、Dispensing machine wiring problem solution: open the case, check whether the hardware connection of the automatic dispensing machine is correct, confirm whether the driver is powered on, confirm the driver, emergency stop switch, jumper setting is correct; Verify that all cables, such as serial cables, are properly connected.

3、Dispensing machine firmware or configuration file is incorrect solution: Dispensing machine firmware upgrade may not be successful, or configuration file update may not be successful. Re-upgrade firmware and configure mechanical parameters; Boot auto reset is not set.