The soldering machine is equipped with large-sized transparent windows, allowing the entire welding process to be observed. This is of great significance for product development and optimization of the process curve. The temperature control is achieved using a high-precision intuitive intelligent controller, which can program perfect curve control. The temperature control is precise, the parameter settings are simple and easy to operate. It can complete the welding of single and double-sided PCB boards of all packaging forms such as CHIP, SOP, PLCC, QFP, BGA, etc. The working efficiency is extremely high. With one soldering machine, one screen printing table and two workers, nearly 100 large-sized PCB boards can be completed in one day, and for small-sized ones, it can reach several thousand. The soldering machine has changed the previous practice where the soldering machine could only rely on natural cooling or pull the PCB board out of the soldering machine for cooling. This has made the reflow soldering process curve more perfect and avoided the problems of damage to surface mount devices and welding shift.

So, how do you maintain a soldering machine? Below, Lianchengxing will tell you several maintenance requirements for the soldering machine:

Please do not place salt, acid, alkali or water substances on the soldering machine.

2. Before the end of work for each team, all personnel must use a clean cloth to remove all the dust and debris from the machines.

3. When the machine is not in use, make sure to remove the power plug to prevent damage to the machine components due to prolonged exposure to electricity.

4. Before leaving work, please turn off the machine, let it cool down, then clean up the excess solder residue and the remaining rosin on the soldering iron tip. After that, turn on the machine again and apply solder to the surface of the soldering iron tip for maintenance (the purpose of applying solder is to prevent the soldering iron tip from being oxidized due to contact with air).

5. Do not attempt to disassemble the components on the soldering machine without authorization.

6. Do not strike the fuselage forcefully to prevent internal loosening.

7. Non-repair personnel are strictly prohibited from making any alterations to the machine.